|
Title: IPSEC CONNECTION STATUS CLOSED Post by: piercarlo on Wednesday 10 October 2012, 07:33:37 am HI
I have the last comunity edition of endian firewall. I´m try to set one IPSEC VPN connection (Host to Net)with certificate and with Key but after save the status of connection is every time CLOSE. What I need to do to Open ? Thanking for help Piercarlo Title: Re: IPSEC CONNECTION STATUS CLOSED Post by: dda on Wednesday 10 October 2012, 08:28:29 am I have tried to get this to work unsuccessfully, but make sure that under Firewall/VPN, that you add a rule saying allow source IPSEC to destination any. My L2TP connection to my Windows server only worked after I did this. Let me know if you get it to work and if you could post a walk-through it would be great. I followed a walk-through on endian.zendesk.com for a road warrior connection but it didn't work. I don't have a static ip address I am not sure if that is why it fails.
Title: Re: IPSEC CONNECTION STATUS CLOSED (2.5.1 community) Post by: PhillipS on Saturday 29 December 2012, 08:25:44 pm I am having the same problem. Now configured 4 Units - all the same result (so I am making the same mistake?)
Connecting 100% from IPcop to IPcop, cannot convert from IPcop to Endian due to this issue. Using ADSL's with "All traffic" routed to "Red-interface" - can PING both side from both sides - Web-interface also working 100% Configuration is easy and straight forward: 1) Menu -> VPN -> IPsec 2) Global settings -> Enable (activate all debug for testing) 3) Connection status and control -with "Use a pre-shared key:" and as per per IPcop 4) Firewall -> VPN Firewall turned Off I must be missing something :'( I will hugely appreciate any assisting/guidance and have TeamViewer to double check my configuration. Thank you in advance ;D Phillip |