Welcome, Guest. Please login or register.
Did you miss your activation email?
Thursday 05 December 2024, 02:55:03 pm

Login with username, password and session length

Visit the official Endian Community Mailinglist  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  General Support
| | |-+  Multiple vlan problem
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Multiple vlan problem  (Read 15416 times)
lirees
Jr. Member
*
Offline Offline

Posts: 8


« on: Thursday 27 October 2011, 01:38:10 am »

hi, i have many difficult to configure  tagged vlan's on endian firewall, this is the switch configuration :

vlan 200
port 1 tagged
port 3,5,7 untagged pvid 200

vlan 300
porte 1 tagged
port 9,11,13 untagged pvid 300

vlan 400
port 1 tagged
all other port untagged pvid 400

all Vlan are in the same subnet, then the address of the green vlan interface must be the same for all vlan
i configure the vlan 200, 300 and 400 in the endian web interface, apply the change, connect the lan cable to the port 1 of the switch and then becomes unreachable, i can't ping it, i can't access in the web interface ...it's like dead
 
the only way to reconnect  is reset endian to default configuration .

where i wrong Huh it's is possible configure this scenario with endian Huh
Logged
mrkroket
Hero Member
*****
Offline Offline

Posts: 495


« Reply #1 on: Thursday 27 October 2011, 02:02:52 am »

Different VLANs but the same subnet, what's the point?

When you connect all VLAN's to GREEN, they will be bridged, so each VLAN can see others, isn't it?

Port 1 on switch must be in trunk mode. The 3 VLAN's should be connected to GREEN on EFW, this way br0 will have the IP of the subnet, and the 3 vlan will be bridged onto br0.
It should work.

Check Address Tables on switch to see if anything goes on port 1, and on what VLAN the MAC address appears.

If using VLAN's without any problem, on a complex configuration (VLAN's on top of bonded interfaces). The only difference is that I use a different subnet on each VLAN and each VLAN goes to a different zone.
Logged
lirees
Jr. Member
*
Offline Offline

Posts: 8


« Reply #2 on: Thursday 27 October 2011, 03:25:13 am »

i want create a vlan with the multiple subnet because i avoid to change static address of the machine's that i can't administrate

the configuration of the switch is correctly all work perfectly, server, pc , printer, wifi ecc..   it is only the endian than don't work !

from the address tables of the switch the port which is connected endian i see the correct mac but the vlan id is 1, there are not vlan id 200, 300, 400 !!

i try to reconfig the endian whit only one vlan and see what happens
Logged
PhoenixVOZ
Jr. Member
*
Offline Offline

Posts: 2


« Reply #3 on: Tuesday 03 January 2012, 04:07:34 pm »

hi, i have many difficult to configure  tagged vlan's on endian firewall, this is the switch configuration :

vlan 200
port 1 tagged
port 3,5,7 untagged pvid 200

vlan 300
porte 1 tagged
port 9,11,13 untagged pvid 300

vlan 400
port 1 tagged
all other port untagged pvid 400

all Vlan are in the same subnet, then the address of the green vlan interface must be the same for all vlan
i configure the vlan 200, 300 and 400 in the endian web interface, apply the change, connect the lan cable to the port 1 of the switch and then becomes unreachable, i can't ping it, i can't access in the web interface ...it's like dead
 
the only way to reconnect  is reset endian to default configuration .

where i wrong Huh it's is possible configure this scenario with endian Huh
You can login to root, change directory to /var/efw/ethernet and then remove the file VLAN_eth0 (or something else like this) then you edit the file br0 (if bridged) with nano command and delete all value like eth0.* (eth0.300, eth0.400) save and reboot your firewall. Your EFW will work well.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.078 seconds with 18 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com