access endian administrator intrface from outside lan

[Guest]

[diriras]

Hello everybody
i am using endian a few months now and i cannot find a way to access it from ouside.
it is set up in a box (no virtual) bridged to a modem, 2 lans (green,RED)
at the firewall/system access I enable the icmp service from source interface RED to ping my endian from outside (thats works)
also i enable tcp/80 http and tcp/443 https from source interface red just to be sure

Then at the port forwarding/NAT tab: incoming ip:any uplink
                                                           incoming service port: http/80/tcp

Translate to:  insert ip 192.168.0.1(endian)
                      port range 80/ nat yes
i enable it and I position it first

I 've also tried diferent ports example:  incoming service port: 85/tcp   enable it at system/access 85 port
but no luck
I checked the firewall logs and it return me this:



Firewall   2010-11-27 19:11:56   ulogd[2625]: INPUT:DROP IN=ppp0 OUT= MAC=45:00:00:30:26:9e:40:00:72:06:54:a5:bd:6e:39:5d:4f:6b:47 :4e:d8:93 SRC=189.110.57.93[/color][/color] DST=79.107.71.78 LEN=48 TOS=00 PREC=0x00 TTL=114 ID=9886 DF PROTO=TCP SPT=55443 DPT=49186 SEQ=465544310 ACK=0 WINDOW=8192 SYN URGP=0 MARK=2000

red ip is the outside and green is my inside (dynamic ips)
I understand that for some reason endian firewall is droping access to it from ouside (red) network and i cannot find a solution

any help will be much appreciated 

thank you
michael

[bradb21]

I would suggest you configure openVPN on your Endian. Establish a VPN connection to your network, and then you will be able to access your internal network and your firewall securely over an encrypted connection.