|
Title: changing NIC Post by: ollenotna on Monday 19 October 2015, 05:39:45 am I had to transfer my disk with endian 2.5.1 on a new computer, then with new network cards.
Now, clearly the network cards (only red and green) were eth2 and eth3. I then edited /etc/businfotab changing eth2-eth3 to eth0-eth1. On restart with ifconfig I see that eth1 is properly configured with the IP address of the external network (red), while the eth0 is not configured. Yet in /var/efw/ethernet/settings I see: GREEN_ADDRESS = 192.168.0.2 GREEN_BROADCAST = 192.168.0.255 GREEN_IPS = 192.168.0.2 / 24 GREEN_NETADDRESS = 192.168.0.0 there is also GREEN_DEV = br0 and in /var/efw/ethernet/br0 I see: eth0 In short, eth0 should be configured. I try netwizard but I get an invalid command mssage (I assume it is for 3.0 endian) and I do not know how to change the card's via console, as I can not use the web interface. what shall I do? other option: reinstall from scratch upgrading to endian 3 but how to save the configurations of the existing proxy and transfer them to the new installation, all from the console? TIA Antonello |