|
Title: Initial network configuration help Post by: xlancealotx on Wednesday 08 June 2011, 01:38:16 am Good morning, setting up our 2.3 community and looking for some help from the forum. This is for a small office with a static IP from our ISP. Behind is the basic 10.x which is working fine, and I can start the setup. I also have a backup DSL line being installed for internet redundancy as we have had some outages. The setup shows Network Interfaces 4 which is correct, so I am wondering what will be the backup.
The green is naturally the 10.x The red is my primary providers public IP. Now I see an orange and green and wondering which (or is there another way) to setup that DSL to be a 'failover'. I would like it to be automatic (maybe even notify) on failover, but what's the best way to go about setting this configuration up. Thanks. Title: Re: Initial network configuration help Post by: speccompsol on Wednesday 08 June 2011, 02:49:25 am Go to Network ->
Interfaces -> Add Interface/Uplink -> Configure Uplink2 accordingly -> Go to Uplink/Main -> Select Uplick2 as backup |