|
Title: problem plese help me Post by: cricido on Wednesday 17 October 2012, 11:35:23 pm hello to all
I need your help i have installed endian till here its all right but my problem start when I must set up endian I describe my configuration briefly my green zone iis 192.168.0./24 and endian 's ip is 192.168.0.15 i configured red zone with gateway and i have put my gateway 192.168.0.1 . after this my endian is unattainable thanks in advance for your kind reply Cristian Title: Re: problem plese help me Post by: dda on Thursday 18 October 2012, 03:40:26 am I am not sure about the connectivity but your green and red zones should not be in the same ip address range. yous should use 10.*.*.* and 192.*.*.* perhaps. You can use ifconfig at the EFW machine to verify the ip address is set correctly.
Title: Re: problem plese help me Post by: cricido on Thursday 18 October 2012, 07:29:23 am thanks for your reply .
i have only a subnet 192.168.0.0/24 , it s not possible to change my ip gateway, so the green zone is the same of the red zone. Any other advice? Title: Re: problem plese help me Post by: dda on Friday 19 October 2012, 01:10:44 am What are you using as a gateway?
Title: Re: problem plese help me Post by: cricido on Tuesday 23 October 2012, 12:55:02 am 192.168.0.1 and my green zone it is like 192.168.0.0/24
|