|
Title: Help with SIP config. Post by: seh2000 on Tuesday 12 October 2010, 10:03:11 am Hello!
I hope someone can help me here. I just build a new machine to run Endian on with 3 1Gb LAN. 1 used for Green, 1 used for Red and 1 for Blue where my VoIP adapter sits. I can register with my VoIP provider, but not make calls... SIP Proxy transparent SIP Port 5060 RTP L P 16382 RTP H P 16482 Autosave Log Calls FW logs outgoing Firewall Blue > Red SIP / UDP / 5060 Green + Blue Any / ICMP / 8+30 But I keep getting this type of error message: FORWARD:DROP UDP (br2) 192.168.2.104:16464 -> 204.11.192.22:62402 (eth1) MAC=00:30:18:ac:c1:15:00:0e:08:cf:d4:7b:08:00 LEN=200 TOS=18 PREC=0xA0 TTL=249 ID=25887 LEN=180 MARK=2800 Why 16464 is dropped when its inside the RTP range in SIP Proxy, I am sure I missed something, but what?! Steen Edit 10/12 Added the VoIP adapter to Orange/DMZ (assume I could have used Blue) used the fixed IP of the VoIP router and allowed "any" service with "any" protocol to Red then I can register, make and receive calls, but isn't this then like having no FW between VoIP adapter? ??? Any one? Input appreciated on correct set-up. Title: Re: Help with SIP config. Post by: seh2000 on Thursday 14 October 2010, 02:20:12 am Update...
I have tried the following configuration, register with VoIP provider = OK, dial tone and dialing, but no voice on outgoing and incoming calls. Source Destination Service Protocol Dest Port Action Remark (MAC of VoIp Adapter) RED SIP UDP 5060 Allow (MAC of VoIp Adapter) RED TFTP UDP 69 Allow (MAC of VoIp Adapter) RED TFTP UDP 21, 2400 Allow 21 & 2400 I found via a google search, but not too sure if correct (MAC of VoIp Adapter) RED NTP TCP+UDP 123 Allow (MAC of VoIp Adapter) RED <ANY> UDP 80 Allow (MAC of VoIp Adapter) RED <ANY> UDP 10000:20000 Allow The above with and without SIP Proxy enabled. I tried with the IP adr for the VoIP adpt instead of the MAC address for same. I have also tried the above together with: Port forwarding / Destination NAT Incoming IP Service Translate to Port IP Range 1/24 IP Range 2/24 UDP/10000:20000 IP VoIP adpt 10000:20000 Filter policy: Allow and Allow with IPs both tried IP Range 1/24 IP Range 2/24 UDP/5060:5080 IP VoIP adpt 5060:5080 Filter policy: Allow and Allow with IPs both tried Any advice/assistance highly appreciated! Steen |