|
Title: Endian Firewall routed subnet on green network Post by: mx2504t on Wednesday 24 November 2021, 09:34:08 pm I am trying to set up an endian firewall appliance and having a hard time with internal traffic routing.
Here is my setup: Green subnet: 192.168.200.0/24 Endian firewall IP: 192.168.200.254 Additional internal routed subnet: 172.16.200.0/24 gateway ip address: 192.168.200.254 Either way, devices on 192.168.200.0/24 and 172.16.200.0/24 are unable to communicate properly. For example, If I can do a simple ping from 192.168.200.x/24 to an ip address on 172.16.200.x/24, not work. If I can do a simple ping from 192.168.200.x/24 to an ip address on 172.16.200.254/24 work. Internet access from both works fine, it's just communication between the 2 subnets that isn't working. When I add the static route through the web based gui, the connections status page shows traffic coming from the 192.168.200.0/24 subnet direction 172.16.200.0/24 as red (internet traffic). Routing table seems not to work. I have some subnet behind the green interface, I set up a route on the Nework -> Routing form, but no route results in the roouting table. In fact if I make a traceroute EFW uses the RED interface to try to reach hosts in other "green" subnet. I also tryed to reboot EFW but nothing appens. Is EFW able to manage subnet behind GREEN interface or not? Can I manage them form the web interface? Thanks! |