|
Title: VPN EFW community 3.0. openvpn help! Post by: vortex2424 on Saturday 01 November 2014, 03:05:20 am when I connect to my vpn connects fine, however I can not do a "ping" to any computer on the lan.
but if I put the same ip but static mode, everything works. I think it's more the client configuration from the server. client dev tap ;dev-node MyTap proto udp remote xxxxxxxxxxxxx 1194 float ;remote-random resolv-retry infinite nobind #;user nobody #;group nobody persist-key persist-tun #;http-proxy-retry # retry on connection failures #;http-proxy [proxy server] [proxy port #] ;mute-replay-warnings ca cacert.pem #cert client.crt #key client.key ;ns-cert-type server ;tls-auth ta.key 1 ;cipher x comp-lzo verb 3 ;mute 20 auth-user-pass Title: Re: VPN EFW community 3.0. openvpn help! Post by: phqr58 on Monday 03 November 2014, 02:23:24 pm With this setup works for me very well.
client dev tap proto udp remote IPREMOTA 1194 resolv-retry infinite nobind persist-key persist-tun ca certificado.pem auth-user-pass password.txt <-- the password.txt file is to be automatically connected comp-lzo verb 3 these customers if they run openvpn Installer (32-bit), Windows XP and later Installer (64-bit), Windows XP and later these nonfunctional openvpn clients. This client connects but can not ping or anything Installer (32-bit), Windows Vista and later Installer (64-bit), Windows Vista and later Title: Re: VPN EFW community 3.0. openvpn help! Post by: vortex2424 on Wednesday 05 November 2014, 05:43:18 am use your settings, but you add "float", otherwise not connected, is in a loop:
" TCP/UDP: Incoming packet rejected from [AF_INET]172.16.1.2:47489[2], expected peer address: [AF_INET]201.xxxxxxx:1194 (allow this incoming source address/port by removing --remote or adding --float)" also change the version of "openvpn" from "Installer (64-bit), Windows Vista and later" to "Installer (64-bit), Windows XP and later", but gives the same effect. After that, I connect, but still with the same problem. Title: Re: VPN EFW community 3.0. openvpn help! Post by: vortex2424 on Wednesday 05 November 2014, 05:57:09 am I tried it with another internet line, and "float" is not necessary.
but gives the same problem. in my work, we use domain windows, and the description of the network card, says "domain name.com (unauthenticated)" Title: Re: VPN EFW community 3.0. openvpn help! Post by: phqr58 on Wednesday 05 November 2014, 10:03:47 am has enabled the firewall VPN traffic?
Title: Re: VPN EFW community 3.0. openvpn help! Post by: vortex2424 on Thursday 06 November 2014, 01:50:51 am Yes, that part is configured. If I put a static IP, allows me to access everything normally. I think the problem is the openvpn client and Route.exe In fact, I tried it in "windows xp" and it worked perfectly. In "windows 7" is where the problem occurs, probe and putting it in compatibility mode: "win xp", "win xp sp3", "win seen." And I run as administrator. Note: Tested on two computers in my home and in my office. |