Welcome, Guest. Please login or register.
Did you miss your activation email?
Thursday 05 December 2024, 06:35:59 pm

Login with username, password and session length

Visit the Official Endian Bug tracker  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  Installation Support
| | |-+  EFW 3.2.2 not booting after install
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: EFW 3.2.2 not booting after install  (Read 59643 times)
jesus.beltran
Jr. Member
*
Offline Offline

Posts: 2


« on: Wednesday 05 April 2017, 02:44:10 am »

Hi,

I'm setting up a new equipment with EFW 3.2.2. Installation goes fine, but as soon as it is completed and the system reboots from HDD, it goes to a black screen with blinking cursor. Nothing else happens. I already tried EFW 3.2.2 and 3.2.1 with the same result. Even swapped hard drives.

System Specs are:

  Gigabyte GA-H81M-H motherboard
  Pentium G3260 LGA1150 processor
  4GB RAM
  Toshiba SATA-3 500Gb Hard Drive

I've disabled the serial port console option at the installation, so I guess this isn't the issue.

Anyone has had the same problem before? Any hints?
Logged
jesus.beltran
Jr. Member
*
Offline Offline

Posts: 2


« Reply #1 on: Wednesday 05 April 2017, 04:04:57 am »

Ok figured this one out. Had to turn off AHCI for SATA on the board's BIOS. That did the trick.
Logged
marziano
Jr. Member
*
Offline Offline

Posts: 1


« Reply #2 on: Friday 03 November 2017, 09:16:30 pm »

Ok figured this one out. Had to turn off AHCI for SATA on the board's BIOS. That did the trick.

Ok, this worked for me too. But what if you want to use a solid state drive? You need AHCI for TRIM to work.
Logged
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 236


WWW
« Reply #3 on: Thursday 08 February 2018, 03:54:25 am »

me too with 3.2.4
gigabyte GA-C1037UN-EU
cpu Celeron 1037U
2gb ram
ssd kingston 30GB

endian 2.5.2 was running, i tried to update it without success
change AHCI to IDE didnt fix
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 236


WWW
« Reply #4 on: Thursday 08 February 2018, 09:39:34 pm »

i can install endian 2.5.2, but 3.2.2 or 3.2.4 cant Sad
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 236


WWW
« Reply #5 on: Saturday 17 February 2018, 09:11:54 pm »

it seems ok after disabled uefi
it was "legacy and uefi", it was not good, it's needed "legacy only"
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
pavo07
Jr. Member
*
Offline Offline

Posts: 1


« Reply #6 on: Wednesday 12 September 2018, 06:21:42 am »

Hi,

Had the same issue. Furthermore I initially thought it was a different situation since I didn't see any cursor blinking, just the black screen and nothing else, but this was later discarded by connecting a different monitor which showed the blinking cursor (resolution issues, you know).

In my case, after playing with AHCI/Legacy, UEFI, secure boot and several options from BIOS + several Endian install attempts (versions 3.2.2 to 3.2.5), nothing seemed to work... At the end we installed a Windows System (7) in the machine (HP ProDesk 600 G1) and in the process we found several partitions in the HDD, possibly created by the previous Endian install attempts, such partitions were deleted leaving only one. Windows got installed and we tried Endian install again on this same machine an disk, in this case with successful result: 3.2.5 up and running.

Hope this helps others in the community  Wink

Rgrds!
Logged
kkhald
Jr. Member
*
Offline Offline

Posts: 3


« Reply #7 on: Wednesday 12 September 2018, 08:16:13 pm »

You sirs.
I hope you wear capes on daily basis. Because those are the advice of heroes
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.156 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com