Welcome, Guest. Please login or register.
Did you miss your activation email?
Saturday 14 December 2024, 03:51:12 am

Login with username, password and session length

Download the latest community FREE version  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  General Support
| | |-+  Quad port NICs that work
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Quad port NICs that work  (Read 19748 times)
Danoh
Full Member
***
Offline Offline

Posts: 28


« on: Tuesday 24 May 2011, 01:01:06 am »

EFW 2.4

Can anyone recommend a PCI Express Quad port half-height NIC card that works with EFW?

I know for a fact that Intel cards work, but they are almost double the price of other 4-port NICs I've seen.

I have tried a StarTech.com ST1000SPEX4 with a chipset of Realtek RTL8111C, but it is not recognized by the kernel.
Logged
Danoh
Full Member
***
Offline Offline

Posts: 28


« Reply #1 on: Friday 18 May 2012, 06:13:28 am »

Thanks for the great support on this site....   Undecided

Almost a year since I posted this with no responses.

FWIW - 2.5 same issue.
Logged
mrkroket
Hero Member
*****
Offline Offline

Posts: 495


« Reply #2 on: Saturday 19 May 2012, 04:20:07 am »

Linux is usually a do-it-by-yourself, esp. the community edition. You probably need to recompile the driver, or by luck having someone else with your very same problem that has the compiled drivers.

I use Intel Quad Port server cards, without a hitch. My uptimes are more than 60 days, and what usually break the uptime is power outage.
I can't recommend  quad ports NIC. I have had one and hangs up a lot, totally unreliable, don't remember the name.

If I should  some card for a firewall, I'd go for Intel or Broadcom, nothing else.
Unless you have a really limited budget, I prefer less money in my pocket and more peace of mind.
Logged
emosneg
Jr. Member
*
Offline Offline

Posts: 1


WWW
« Reply #3 on: Tuesday 29 May 2012, 04:36:12 pm »

thanks,very much.
Logged

Horror , Information, Collection,Terrorism—gohorrormovie.com.
pwinterf
Full Member
***
Offline Offline

Posts: 14


« Reply #4 on: Tuesday 29 May 2012, 11:30:18 pm »

The  8111C card was troublesome with several linux's including 2.4, recognised as the other realtec card and hence no comms
but I can confirm they now work on 2.4.1 and upwards as well as many kernels
now above 2.6.3x

maybe worth a try, with 2.4.1

be aware a reload is needed and re-apply rules going from 2.4 to 2.41 because of the uuid problem.

unless you can fix it yourself after upgrade.

but 2.4. rules work no problem on 2.4.1 (more than i can say for 2.5.1 in my experience).

the intel cards are a much higher quality card then the realtec hence why they are so expensive.

and they are worth the extra money.



regards peter
Logged
Danoh
Full Member
***
Offline Offline

Posts: 28


« Reply #5 on: Thursday 07 June 2012, 01:04:15 am »

Same issue with an Intel Quad Port - on EFW 2.5.1 -- Intel 82580 Rev01 (Intel Server Adapter I340-T4)

Shows in lspci, but doesn't show in ifconfig -a

Any suggestions?
Logged
mrkroket
Hero Member
*****
Offline Offline

Posts: 495


« Reply #6 on: Thursday 07 June 2012, 02:10:57 am »

Probably the igb drivers are not installed by default, but once you compile the drivers, they worked great.

Mine appears as:
03:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
03:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)

So the issue here is to compile the drivers for 2.5.1. I still use the 2.4.0, so I don't know if my drivers will work on 2.5.1.
Logged
Danoh
Full Member
***
Offline Offline

Posts: 28


« Reply #7 on: Thursday 07 June 2012, 03:15:42 am »

I did a 'modprobe -a igb' and it loaded a module as seen in 'lsmod' but still no eth devices show in 'ifconfig -a'

My 'lsmod' appears as:

01:00.0 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)

I downloaded the igb-3.4.7.tar.gz from intel, but how am I supposed to compile this when EFW doesn't come with a compiler and I can't yum easily because of no network connections.

This is frustrating.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.109 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com