EFW Support

Dear all,

I'm a newbie here and need some help to configure my network, here's the topology:

modem internet      other place
     |                            10.119.30.0
     |                           10.119.11.0
     |                                10.119.10.0
     |                                |
  router                         modem
10.119.60.1               10.119.60.87
     |--------------------------------|
      |
        switch
      |
          LAN
     10.119.60.

currently i'm using linksys as a router, and i just entering advanced routing tab and set destination IP (other place) and 10.119.60.87 as gateway.

i don't have any problem to share my internet connection into LAN, but the problem that i can't connect to other place because i can't by pass endian IP directly into gateway 10.119.60.87, here's for the comparism:

while using linksys as router (tracert):
--- (10.119.60.1 as router's IP bypassed)
10.119.60.87 (gateway on my place)
218.33.40.18
218.33.54.160
218.33.54.161
10.119.30.32 (other place)

while using endian as router (tracert):
10.119.60.1 (not bypassed)
10.119.60.87 (gateway on my place)
218.33.40.18
218.33.54.160
218.33.54.161
10.119.30.32 (other place)

Need help to solved this problem ......

Thank's
Boodeey

well ... no respon huh?  ???

If your tracert reach your destination the static routes are ok.  If not, add them on Network->Static routes.
Why not bypassing the EFW is a problem?

well ... thank's for the respond
ping and tracet are OK (i'm using route destination: 10.119.30.0 gatewayL 10.119.60.87)
the problem is 10.119.30.0 is citrix server, i just can't open metaframe login if i'm not bypassing EFW

u can see on the topology while i'm using router, modem (10.119.60.87) doesn't connected to router but into LAN's switch

i think the subject is similar as "route network behind green"

()

how to change br0 to eth1