EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Sunday 08 September 2024, 12:21:09 pm
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Get the new Updates directly from Endian
HERE
14247
Posts in
4376
Topics by
6509
Members
Latest Member:
VikyV
Search:
Advanced search
EFW Support
Support
Installation Support
2.4 New hardware - ethernet ports numbers change on restore - all broken
0 Members and 2 Guests are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: 2.4 New hardware - ethernet ports numbers change on restore - all broken (Read 37458 times)
DFen
Full Member
Offline
Posts: 46
2.4 New hardware - ethernet ports numbers change on restore - all broken
«
on:
Thursday 08 July 2010, 08:09:47 pm »
I need to replace a motherboard on an existing efw 2.4 installation.
The Old MB has 4 ethernet all realtek using r8169 driver
The new MB has 4 ethernet ports 3 using r8169 and one via_rhine
I installed 2.4 on the new MB, ran the web interface and then efw-upgrade - all OK eth0 through eth3 are present and working.
I then uploaded a backup from the live (2.4) firewall and installed it - no errors so far
On reboot from the restore operation I see I now have eth4 through eth7 instead of eth0 through eth3, and nothing works.
Something in the restore appears to be "breaking" the ethernet port number assignment.
Please, please could somebody give me an idea of where to look, or how to fixup a backup to the offending files.
TIA
Follow up/Work around
=================
It appears the is "caused" by /etc/businfotab in the backup set
I tried the following with success:
Live fw /etc/businfotab
~~~~~~~~~~~~~~~~~~
# Generated by ethconfig
eth0 01:00.0
eth1 02:04.0
eth2 02:06.0
eth3 02:07.0
~~~~~~~~~~~~~~~~~~
After replacing MB with different network cards, but before installing backup set
~~~~~~~~~~~~~~~~~~
eth0 00:09.0
eth1 00:0b.0
eth2 00:0c.0
eth3 00:12.0
~~~~~~~~~~~~~~~~~~
After installing backup set
~~~~~~~~~~~~~~~~~~
# Generated by ethconfig
eth0 01:00.0
eth1 02:04.0
eth2 02:06.0
eth3 02:07.0
eth4 00:0c.0
eth5 00:09.0
eth6 00:0b.0
eth7 00:12.0
~~~~~~~~~~~~~~~~~~
So I edited /etc/businfotab to make it look like the original setting for this hardware:
( and while |I was at it I moved eth3 to eth0 and shifted the others along!
~~~~~~~~~~~~~~~~~~
# Generated by ethconfig
eth0 00:12.0
eth1 00:09.0
eth2 00:0b.0
eth3 00:0c.0
~~~~~~~~~~~~~~~~~~
Reboot and all seems to be OK now.
Further Follow-up
============
1. Shifting eth3 to eth0 did not work as expected!
2. Alternative work around is to rename (or delete) the etc/businfotab inside the backup set before restoring it.
I used 7zip on my windows workstation to rename the file to "businfotab.backup"
To be quite honest I do not see why this file should be part of the backup set in the first place
Logged
arminf
Full Member
Offline
Posts: 56
Re: 2.4 New hardware - ethernet ports numbers change on restore - all broken
«
Reply #1 on:
Thursday 08 July 2010, 08:54:09 pm »
HI DFan
had the same. Try to connect to every port to get on the web gui.
As soon you are there you are able to reconfigure the network ports/bridges
Good Luck!
Logged
DFen
Full Member
Offline
Posts: 46
Re: 2.4 New hardware - ethernet ports numbers change on restore - all broken
«
Reply #2 on:
Tuesday 13 July 2010, 02:42:04 am »
I have looked a bit further into the backup system.
The file causing the problem "/etc/businfotab" is included within the backup set.
This file can easily be excluded from both backup and restore by editing
/var/efw/backup/exclude.system
and adding the line:
etc/businfotab
This will stop the file being included within the backup.
It will also cause the restore to ignore the file during a restore, so it wont matter if it was in an earlier/imported backup.
This is altogether easier and safer than the above workarounds,
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.031 seconds with 18 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com