Welcome, Guest. Please login or register.
Did you miss your activation email?
Friday 20 December 2024, 01:42:06 am

Login with username, password and session length

CLICK HERE for the The official Endian Roadmap and Issue tracker
14262 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  General Support
| | |-+  endian and hdsl line 8 mg
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: endian and hdsl line 8 mg  (Read 11302 times)
Giulia 84
Jr. Member
*
Offline Offline

Posts: 2


« on: Saturday 16 January 2010, 12:48:56 am »

Hi everybody, my name is Giulia and work in Italy.
I have installed the endian firewall community version in a pc dell dimension 3000 (512mb ram and pantium 4).
I have installed a router cisco and a line hdsl 8 mega.

the router is connect in the red interferface with a cross cable.
The Lan is connect in a green interface.

Good , my problem is the follow:

If i do a test with speedtest.net when my pc is connect direct in the router i have 6,5 mb of band in upload and download
If i do a test when my pc is in the LAN my band is 1,5 mb in download and 5 mb in upload.

I ask the follow question:

Is possibile resolve taht problem?
and what is the problem?
Anybody help i little women Roll Eyes

Thanks for help and good day

CIAO.
Logged
hacevedo
Jr. Member
*
Offline Offline

Posts: 8


« Reply #1 on: Saturday 16 January 2010, 03:24:19 am »

Sounds like you are experiencing an interface duplex mismatch. To check, do the following: (let's say all interfaces are 100Mbps)

Check the duplex on your Cisco router inside interface. Then go to the endian via SSH and issue "mii-tool -v" and check the speed of the RED interface.
If the duplex is not the same on both side, you have found the problem. To fix it you may have to disable autonegotiation on the router and fixing the duplex to full.

Hope that helps.
Logged
Giulia 84
Jr. Member
*
Offline Offline

Posts: 2


« Reply #2 on: Saturday 16 January 2010, 08:54:30 pm »


root@efw-paruzzaro:~ # mii-tool -v
eth0: negotiated 100baseTx-FD, link ok
  product info: vendor 00:00:00, model 0 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link : 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
eth1: negotiated 100baseTx-FD, link ok
  product info: vendor 00:00:00, model 0 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link : 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
eth2: negotiated 100baseTx-FD, link ok
  product info: vendor 00:aa:00, model 51 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
  link : 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD


Please, help me.
I copy and past my putty output, for your impression is ok or no? Wink

thanks for help
Logged
hacevedo
Jr. Member
*
Offline Offline

Posts: 8


« Reply #3 on: Monday 18 January 2010, 02:40:51 am »

The speed and duplex on the Endian side look fine. What about your Cisco side? By the way, which packages do you have enabled on the firewall? Are you running Snort by any chance?

Also, have you tried taking a look at "top" while you are doing the speed test?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.078 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com