Endian 3.0 community IPSEC service STOPPED

[Guest]

[RDequal]

I switched on IPSEC vpn, configured a connection, but it doesn't work.
IPSEC, in Status -> services, is always STOPPED.
Any suggestion?
Thanx
R.

[mmiat]

did you activate it?
I made same error first time, you have to configure connection AND to activate service

[enterat]

Hi
I'm having the same problem, even with the link enabled the services page still reports stopped and the link is constantly connecting.

Did you have any joy with yours?

[phqr58]

the user SerFingolfin published the solution and it works great.

[enterat]

the user SerFingolfin published the solution and it works great.

Do you have a link to the solution as I can't find anything by SerFingolfin in a search

[phqr58]

hello

http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm
http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm

[ayaari]

Hi all
after updating:
efw-ipsec-3.0.52-1.endian9.noarch.rpm
jobsengine-3.0.26-1.endian5.i586.rpm
ipsec connection couldn't establish.
any idea?

[phqr58]

Write to phqr58@gmail.com

[phqr58]

1) download
http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm
http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm


2) Update packages ENDIAN 3.0, is not necessary in ENDIAN 2.5.2 or earlier
rpm -U http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm
rpm -U http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm

3)  After upgrading reboot

[X-Dimension]

I've updated our Endian 3.0 Community with these packages, but it still don't work.

[X-Dimension]

OK, IPsec is now working fine, after changing some firewall rules, but the VPN service is still shown as "stopped" on the status page.

[fcastillop]

Hello, newbie here.

Reading this post, I found out that is my same problem with my EFW 3.0, I have accomplished the conection in the VPN/IPSEC section, but I can't access to the other side of the conexion. I've configure an ipsec net to net conection. I think that the part I'm missing is the Firewall rules, would X-Dimension post the rules he configure or at least explain how he did it. The only thing I did, was openning the ports 500, 4500 and 50 on the incoming section of the Firewall.

I can't find anywhere how to configure the firewall to allow this trafic.

Another issue I have detected is that in the status section, I see the VPN (ipsec) as stopped, but if I run in the shell #ipsec status it shows me that the conection is up.

I'll appreciate any help you can give me. Thank you

[chatthasong]

Hello, newbie here.

Reading this post, I found out that is my same problem with my EFW 3.0, I have accomplished the conection in the VPN/IPSEC section, but I can't access to the other side of the conexion. I've configure an ipsec net to net conection. I think that the part I'm missing is the Firewall rules, would X-Dimension post the rules he configure or at least explain how he did it. The only thing I did, was openning the ports 500, 4500 and 50 on the incoming section of the Firewall.

I can't find anywhere how to configure the firewall to allow this trafic.

Another issue I have detected is that in the status section, I see the VPN (ipsec) as stopped, but if I run in the shell #ipsec status it shows me that the conection is up.

I'll appreciate any help you can give me. Thank you

How method to connect VPN IPsec? etc. Static IP,DDns

[mmiat]

similar problem here: http://www.efwsupport.com/index.php/topic,4091.0.html