|
Title: IPSEC Routing Between Tunnels not working Post by: mandusm on Thursday 14 April 2011, 08:30:28 pm Hi Guys.
I have a VPN Set up using IPSEC. I created two tunnels. TUNNEL1 : NET to NET Local Network: 192.168.120.0/24 Remote Network: 192.168.80.0/24 PSK: psk001 (not real psk, just for example) TUNNEL2: HOST to NET (RoadWarrior) Local Network: 192.168.120.0/24 Remote Network: 192.168.10.0/24 PSK: psk002 So, both tunnels connect to their respective counter parts. And I can ping to both subnets from the router. eg. I can ping both 192.168.10.1 and 192.168.80.1 from the Endian server. But, I cannot ping from eg. 192.168.10.1 to 192.168.80.1 I realize that this is most probarbly a routing issue? But I am very limited in my knowledge of how to get the two tunnels talking to each other... At the moment, this is the kernel routing table. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 255.255.255.248 U 0 0 0 eth1 192.168.252.208 41.160.19.161 255.255.255.248 UG 0 0 0 ipsec0 41.160.19.160 * 255.255.255.248 U 0 0 0 eth1 41.160.19.160 * 255.255.255.248 U 0 0 0 ipsec0 192.168.80.0 * 255.255.255.0 U 0 0 0 ipsec0 192.168.120.0 * 255.255.255.0 U 0 0 0 br0 192.168.120.0 * 255.255.255.0 U 0 0 0 ipsec0 192.168.10.0 41.160.19.161 255.255.255.0 UG 0 0 0 ipsec0 default 41.160.19.161 0.0.0.0 UG 0 0 0 eth1 This is pretty urgent, if anyone out there can help. It will be greatly appreciated. |