|
Title: Step by step configuration of endian vpn via l2tp client Post by: wakowako on Tuesday 10 April 2012, 03:18:26 pm Hi Masters,
Newbee here, i want to configure my efw vpn. please help me how. i want to assign static vpn address to my client. my ISP is dynamic dhcp. my local network using efw is 192.168.100.1 via DHCP mode thanks. /wako Title: Re: Step by step configuration of endian vpn via l2tp client Post by: Aldo on Saturday 21 April 2012, 05:19:02 pm Hi,
I'm trying this Endian procedure, but without success. "Independently of the device you are using, the connection via L2TP/IPsec requires the following data, that should have been previously configured on the VPN/IPsec server: The IP address or hostname of the L2TP/IPsec server (i.e., of the Endian UTM appliances where the IPsec server runs). The PSK secret, i.e., the password of the IPsec tunnel, that can be retrieved under Menubar > VPN > IPsec, by clicking on the Edit icon next to the connection, and then looking in the Authentication box. The username and password of the L2TP user. The username is retrievable from Menubar > VPN > VPN users, and must be allowed to use L2TP. You should write the abovementioned data down or remember it, since you will have to enter them in the corresponding configuration sections of your device. Connecting an Android-based deviceGo under Settings > Wireless & networks > VPN Settings > Add VPN > L2TP/IPsec in your Android-based device. Enter your details as below: VPN Name: the name to identify the connection, at your will. Set VPN Server: The IP address or hostname. Set IPsec preshared key. The PSK secret. Enable L2TP secret: Username and password. DNS seach domains: you can leave this blank. Connecting an iOS-based device (iPhone, iPad, etc)To configure your Apple device follow the following steps: Go under General > Network > VPN, then tap Settings and select L2TP. Enter the L2TP/IPsec IP address or hostname. Tap Account and enter your username. If you want to store your password on the device, tap Password and enter your password. Tap Secret and enter your PSK Secret. Tap Save to store the configuration on the device. " Please let me know if works. Aldo Title: Re: Step by step configuration of endian vpn via l2tp client Post by: kashifmax on Monday 23 April 2012, 10:49:14 pm These settings is valid for EFW(2.5.1).
Goto VPN Menu > Global Settings and set the subnet for VPN (this is dhcp). To assign static IP you need to specify it while creating new VPN account, so on the same menu goto Account > Add account and type IP for the VPN user under Custom push configuration, Static ip addresses field... Note: In order to work you must specify a rule in VPN Firewall. Also you need the files (certificate & configuration file) to be copied on the client machine... Title: Re: Step by step configuration of endian vpn via l2tp client Post by: wakowako on Thursday 03 May 2012, 04:42:02 pm Many Thanks for the support.
Cheers, Wako Title: Re: Step by step configuration of endian vpn via l2tp client Post by: kashifmax on Tuesday 08 May 2012, 06:12:28 pm You're welcome ;)
Title: Re: Step by step configuration of endian vpn via l2tp client Post by: dda on Wednesday 15 August 2012, 04:44:42 am Do you need DHCP enabled on EFW to get this to work?
Title: endian firewall efw-merc activation key Post by: Faheem on Monday 28 April 2014, 09:24:56 pm Dear all,
kindly Assist me from where i can get the endian firewall efw-merc activation key... ? Thanks & Regards, Faheem Title: Re: Step by step configuration of endian vpn via l2tp client Post by: NELSON-TI on Saturday 17 May 2014, 01:28:38 am :-\ Yo logre realizar la conexion VPN con exito, mi cliente es asi...
client remote ..xx. 1194 dev tap proto udp resolv-retry infinite nobind persist-key persist-tun ca c:\\keys\\cacertfema.pem comp-lzo verb 3 auth-user-pass Pero al abrir u archivo pequeño de excel por ejemplo demora casi un minuto en hacerlo, su tamaño es de 1.5 mb no se si debo crear reglas que aceleren esto o se debe a algo que falte en el vpn servidor o cliente.. uso endian 3.0 y open vpn GUI version 1.0.3 |