|
Title: SiS190 Card not working Post by: pigdog on Wednesday 12 August 2009, 12:38:14 am Good day all,
Well now I feel like a total idiot. I have a system with 3x network cards: lspci | grep net 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 190 Gigabit Ethernet Adapter (rev 01) 00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) lsmod | grep mii mii 9728 4 sis190,8139cp,8139too,via_rhine so it would appear that the firewall is detecting all my NICs, however when I run ifconfig -a i get the following: ifconfig -a br0 Link encap:Ethernet HWaddr 00:22:B0:DE:EA:17 inet addr:x.x.x.x Bcast:x.x.x.x Mask:x.x.x.x UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8066 errors:0 dropped:0 overruns:0 frame:0 TX packets:2212 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:550519 (537.6 KiB) TX bytes:549058 (536.1 KiB) eth0 Link encap:Ethernet HWaddr 00:22:B0:DE:EA:17 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:8131 errors:0 dropped:0 overruns:0 frame:0 TX packets:2227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:673194 (657.4 KiB) TX bytes:550848 (537.9 KiB) Interrupt:16 Base address:0xc800 eth1 Link encap:Ethernet HWaddr 00:50:BF:27:5E:15 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:17 Base address:0x400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:128 errors:0 dropped:0 overruns:0 frame:0 TX packets:128 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9344 (9.1 KiB) TX bytes:9344 (9.1 KiB) I need to try and figure out how to get the system to display the sis card as I need 3 cards as I want RED,GREEN,BLUE config for the firewall and since the board has no more free PCI slots I am forced to use the onboard sis card. I really appreciate the help Thanks Title: Re: SiS190 Card not working Post by: pigdog on Saturday 15 August 2009, 05:56:33 pm It seems there is a problem with these cards and linux in general so I will have to make some other plane :-[
|