Welcome, Guest. Please login or register.
Did you miss your activation email?
Thursday 05 December 2024, 02:43:35 pm

Login with username, password and session length

Visit the Official Endian Reference Manual  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  VPN Support
| | |-+  Routing over IPsec-based VPN
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Routing over IPsec-based VPN  (Read 11101 times)
j.wolski
Jr. Member
*
Offline Offline

Posts: 1


« on: Wednesday 13 November 2013, 05:31:44 am »

Hi,

as they say, Fragen kostet nichts, I need professional advice with endian 2.5.1.

I have two subnets e.g. 192.168.1.0/24 and 192.168.10.0/24 connected together through IPSEC. I can ping from 192.168.10.0/24 to 192.168.1.0/24, connect servers and so on.

At 192.168.1.25, I have configured router between 192.168.1.0/24 and 10.10.5.0/24. In 192.168.1.0/24 subnet, after proper routing and host configuration, I can ping addresses from 10.10.5.0/24. I can not do this from 192.168.10.0/24.

At 192.168.10.0/24, I have configured dns name for host that points to 10.10.5.17, later I have established routing that
every traffic toward 10.10.5.0/24 should be transferred to 192.168.1.25 (it does not work) or to 192.168.1.1 (which does not work either), my 192.168.1.0/24 Endian.

Last but not least, at 192.168.10.0/24 endian there are two red cards. Tracerouting 10.10.5.17  indicates that traffic goes to WAN instead of IPSEC VPN. Also, may be it is important, I can not ping proper hosts in 192.168.10.0 from 192.168.1.0 except Endian.

If you please help, I would be grateful.
Sincerely,
Jacek Wolski,
ZGN Mokotów
Warszawa, Poland
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.063 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com