Endian 2.5 Single Interface

[Guest]

[jonathanwgnz]

Hi, I am trying to configure a proxy server with one interface,
Ive tried to use the Gateway option for the red network on the same network/subnet as the green network since there is one interface. As soon I do this i lose web access to endian.
Does any one know how to setup endian 2.5 with a single interface with proxy support?

Thanks
Jonathan

[duister]

I have the same issue on the 2.5 release; installation on a machine with two nics; I'm using only one interface with the red gateway option.
After initial configuration using the wizard, the endian can ping the network; the network can ping the endian device but no SSH or
web traffic gets a connection the endian host...

Any tips would be appreciated on this this.

[qhris]

I wouldn't even try to do that. Nics are , you can get one on ebay for 5 bucks. If you are low on slots then look around for a dual nic card. I run mine on an ancient Dell desktop using the motherboard nic for red and a dual nic card (that I got on ebay for 5 bucks) in my one PCI slot for green and blue interfaces. It runs with no problems as long as I don't monkey with it too much.
Q