Welcome, Guest. Please login or register.
Did you miss your activation email?
Friday 13 December 2024, 04:12:44 pm

Login with username, password and session length

Download the latest community FREE version  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  Installation Support
| | |-+  Unable to get PPTP working
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Unable to get PPTP working  (Read 24264 times)
jaschultzy
Jr. Member
*
Offline Offline

Posts: 3


« on: Thursday 17 October 2013, 01:19:54 pm »

I have a 2012 Server working as PPTP server>Cisco 3560>Endian 2.5.2

I've tried forwarding TCP 1723 to the server, GRE 0 to the server, and UDP 47 as suggested by other topics.  Nothing seems to work.  Any help is appreciated.
Logged
speccompsol
Full Member
***
Offline Offline

Posts: 44


« Reply #1 on: Saturday 19 October 2013, 02:28:35 am »

Forward to your 2012 server ip . .  .

TCP Port 1723
Protocol GRE 47
UDP Port 500
  [I have at times needed this additional port but not always]

Make sure your Outgoing Firewall allows tcp port 1723 from the server ip
Logged
jaschultzy
Jr. Member
*
Offline Offline

Posts: 3


« Reply #2 on: Sunday 20 October 2013, 01:55:33 am »

So I tried as suggested but I keep getting an error after it hangs on verifying name and password.  I can connect from inside the firewall with no issues via PPTP so my issue has to be on the firewall.  The screenshots show my settings for port forwarding and then incoming routed traffic.  Again I have the outgoing and vpn firewalls disabled.  I know that I have some overlapping/redundant configs but I was desperately trying everything last night.  I have over 8 hrs in troubleshooting this and feeling dumber by the minute.  I know this shouldn't be this hard.
Logged
bozzen
Jr. Member
*
Offline Offline

Posts: 5


« Reply #3 on: Friday 22 November 2013, 10:03:29 am »

I had the same problem , turned out to be Vmware ESXI 5.5 wich I used for virtual plattform.

Solution :
Change nic from E1000 to flexible or vmnic3 . Worked for me Smiley
Logged
bozzen
Jr. Member
*
Offline Offline

Posts: 5


« Reply #4 on: Friday 22 November 2013, 05:05:35 pm »

I had the same problem , turned out to be Vmware ESXI 5.5 wich I used for virtual plattform.

Solution :
Change nic from E1000 to flexible or vmnic3 . Worked for me Smiley

It's a known bug in Esxi 5.5 with E1000 and GRE , google and you will find the KB from Vmware on it.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.078 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com