|
Title: Install 3.0 on Hyper-V 2012R2 Help Post by: t14u on Wednesday 28 May 2014, 08:05:22 am Hi,
I want to test efw and anstaro for replacing my TMGs. Astaro runs fine on Hyper-V, but efw 3.0 Community does not run on Hyper-V. When I set my internal NIC to 10.1.1.242 with 255.0.0.0 during setup after the required restart the console came up and shows 10.1.1.242/24 (the 24 is wrong) and after a while (10-30 seconds) the netmask switches to /31. The interface is also not reachable. Tested with 4 cores 4096GB and 1 core 2048GB Any Ideas here? Thanks Title: Re: Install 3.0 on Hyper-V 2012R2 Help Post by: andersonlugo on Wednesday 23 July 2014, 10:56:59 pm I have Endian 3.0 on Hyper-v and runs perfect the only problem I have presented is from a few days ago over here. I've configured endian firewall and as a transparent proxy and all Seemed to work well since some days ago, now when i try to connect to an host.caracasvpn.com Venezuela provider i can Because the proxy Gives me this message: (110) Error connection timed out, but if i turn off the proxy it works, i have cleaned the cache and turned off and then Also on the proxy, but endian Also Restarted With the proxy on the page does not work ... why ?
|