|
Title: Installation 2.4.1 Community Edition on Soft Raid 1 Post by: Allenrain on Saturday 19 July 2014, 01:07:49 pm Good day dear forum
I'm new here and I hope here to install Endian community edition 2.4.1'm right because gestalltet somehow difficult. Should it recognize the place of it the hard drives he says 2 x 0GB (disk size 0), but there are which available 2 x 3 TB (BIOS sata1 = 3000GB, sata2 = 3000GB). Weis a Council ?? Thanks in advance. Title: Re: Installation 2.4.1 Community Edition on Soft Raid 1 Post by: kieronrob on Saturday 19 July 2014, 01:50:22 pm Hi,
Endian uses a rather old 32-bit Linux 2.6 kernel so it probably can't support such large disks. I would try with two smaller disks and see if it works before trying larger disks. Title: Re: Installation 2.4.1 Community Edition on Soft Raid 1 Post by: mmiat on Tuesday 22 July 2014, 05:49:03 pm 3TB? exaggerated, you need only 10GB :)
|