|
Title: EWF33 - VMware - GREEN with 2 interfaces Post by: FW on Tuesday 10 December 2019, 03:05:04 am Hi,
Configuration : EWF 3.3.0 on VMware ESXi 6.7 ( CentOS 7 64bit, 2vCPU, 2GB RAM, 30GB HDD, 4 VMXNET3 NIC's ) RED eth1 ( primal DHCP client ), eth3 ( secondairy DHCP client ) = ok GREEN eth0 + eth2. I assume br0 holds the DHCP server. Using eth0 a PC gets an IP address from the GREEN zone, however eth2 gets no IP address. More, when I give de PC a fixed IP address in the range, I still can't ping the EWF33 firewall. GREEN with single eth0 interface works. GREEN with singe eth2 interface works. eth0 on GREEN and eth2 on ORANGE with there own DHCP services works; but I fail to get communition between GREEN and ORANGE. I like an easy setup with 2 interfaces on GREEN. Any idea's ? Regards, Frans Title: Re: EWF33 - VMware - GREEN with 2 interfaces Post by: FW on Tuesday 10 December 2019, 08:25:00 pm Found a solution.
In VMware ESXi 6.7 Edit the port group for the LAN adapters At Security, Accept Promiscuous mode; The default is/was: not inherit from vSwitch. Of you change the repectable vSwitches ... Frans |