OpenVPN certificate issue on 2.3 Endian

[Guest]

[mrlonely78]

Guys;

I have been using 2.2 before, and now reupgrading to 2.3 with the CLEAN INSTALL.

I create a new OpenVPN setting but this time, i get this error from my client.

The error as below;

Wed Mar 10 10:25:55 2010 LZO compression initialized
Wed Mar 10 10:25:55 2010 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ]
Wed Mar 10 10:25:55 2010 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Wed Mar 10 10:25:55 2010 Local Options hash (VER=V4): 'd79ca330'
Wed Mar 10 10:25:55 2010 Expected Remote Options hash (VER=V4): 'f7df56b8'
Wed Mar 10 10:25:55 2010 Socket Buffers: R=[8192->8192] S=[8192->8192]
Wed Mar 10 10:25:55 2010 UDPv4 link local: [undef]
Wed Mar 10 10:25:55 2010 UDPv4 link remote: 192.168.10.1:1194
Wed Mar 10 10:25:55 2010 TLS: Initial packet from 192.168.10.1:1194, sid=3b23a3e1 f30f5208
Wed Mar 10 10:25:55 2010 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Wed Mar 10 10:25:55 2010 VERIFY ERROR: depth=1, error=certificate is not yet valid: /C=IT/O=efw/CN=efw_CA
Wed Mar 10 10:25:55 2010 TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
Wed Mar 10 10:25:55 2010 TLS Error: TLS object -> incoming plaintext read error
Wed Mar 10 10:25:55 2010 TLS Error: TLS handshake failed
Wed Mar 10 10:25:55 2010 TCP/UDP: Closing socket
Wed Mar 10 10:25:55 2010 SIGUSR1[soft,tls-error] received, process restarting
Wed Mar 10 10:25:55 2010 Restart pause, 2 second(s)


I need some advise on;

1) What's the problem all about
2) Is there anyway for me to RESET the OpenVPN setting including CERT generated by the Endian

I also noticed 1 thing;

1) When enable the OpenVPN from the web interface, i get error if the POOL IP is from GREEN Interface IP RANGE.
2) When change to others IP RANGE, then after ENABLE, you will see the POOL IP goes back to GREEN Interface IP RANGE but the OpenVPN is ENABLE without ERROR.


Need help on this.

Thanks.

[gnomme]

Did you solved your problem? I have the same issue in 2.4 version.

Its very sad to see no help for you on this!! Endian must provide more support to its community!!