EFW Support

Hi Everyone,

I have been pulling my hair out and finally have given up, please help..

I have a EFW sitting as my default gateway, and i have a Cisco sitting on the same subnet.
The Cisco is hosting a VPN to 10.0.0.0/24, my network is 192.168.1.0/24

I have added a route from (blank) to 10.0.0.0/24 via static gateway 192.168.1.10 (cisco) and i can ping and access devices on the 10.0.0.0/24 subnet just fine

The problem is comming back in from 10.0.0.0/24 to 192.168.1.0 is not working
From the 10.0.0.0/24 network i can ping 192.168.1.10 (cisco) 192.168.1.1 (EFW), but nothing else

If i go onto a machine on the 192.168.1.0/24 network and do a "ROUTE ADD 10.0.0.0 MASK 255.255.255.0 192.168.1.10"
All communication works fine and i can see everything, telling me the problem is that the endian doesn't route properly when the connection is being initiated from the outside, but I might have just slipped up, it's been a long day.

Any help appreciated,
THanks
WIhan

I have since found out that it seems i do have connectivity, it just won't ping, so there must be something in EFW blocking ICMP, however inter zone firewall and outgoing firewall have been turned off.

you have to open the ICMP port between the 2 subnets. Remember Endian is a ROUTING FIREWALL.

Hi, and thanks for your comment.

So do you mean I need to open the port in the interzone firewall, or the outgoing firewall?
I am not sure how Endian will see this as it is all considered to be in the green zone, even though it is on a different subnet.
If you can let me know where to allow the ICMP that would be great.
I have tried it in several places, which is why i resorted to turning all firewall's off, but i still can't get the response.

Cheers
Wihan