Outline:
You can
install EFW with no problems when using an 3ware HARDWARE raidcontroller (tested with 9 serie card). But the
setup doesn't add the 3w-9aaa module to the kernel ram images. As a result the server will panic after you booted the server
because it does not have access to the / partition because of missing raid support.
Error looks like:
Mounting tmpfs on /dev
mounting root filesystem with flags noatime
mount: error 6 mounting ext3 flags noatime
well, retrying without the option flags
mount: error 6 mounting ext3
well, retrying read-only without any flag
mount: error 6 mounting ext3
Error opening /dev/console!!!! 2
switchroot: mount failed: 22
Kernel panic -not syncing attempting to kill init
Rebooting in 10 seconds
Sollution:This is how I fixed it. I did ran the installer again and when the setup is ag for the network parameters (last step in setup) you do:
- ALT + F3, you will see a prompt
- chroot /harddisk (enter)
- echo "alias scsi_hostadapter 3w-9aaa " >> /etc/modprobe.conf
- echo 'INITRD_MODULES=3w-9aaa" > /etc/sysconfig/kernel
- mkinitrd -f /boot/initrd-`uname -r`.img `uname -r`
- exit
- ALT+F1 and finish setup
Well I hope it's useful because it took me some time to figure out
Author