I am switching from Guide Dog/Guard Dog to efw so I can use a vpn, intrusion detection, virus scanning (on the firewall), etc.
I am using 2.3 because the iso for 2.4 would not install on my computers (dedicated Dell T105 and T110.)
I have set up a simple network to test the firewalls:
Red - 174.141.46.204
Green - 192.168.0.49
Orange - 10.10.10.49
There are two servers on the orange network and one workstation on the green network. I can access efw from the workstation on the green network. I have tried to get two (simple) things to work:
1. Forward red zone traffic on port 8080 to a Tomcat server in the orange zone:
Access from: Zone/VPN/Uplink ... <ANY uplink>
Target: Zone/VPN/Uplink ... <ANY Uplink>
Filter policy: Allow
Service/Port: Service: <ANY> Protocol: TCP Target port: 8080
Translate to: Type: IP DNAT Policy: NAT
Insert IP: 10.10.10.40 Port: 8080
Both 'Enabled' and 'Log' are checked.
2. Allow traffic between zones (Inter-zone traffic... green to orange):
Source: Zone/Interface Interface: GREEN
Destination: Zone/Interface Interface: ORANGE
Service/Port: Service: <ANY> Protocol: <ANY>
Policy: Action: ALLOW
Both 'Enabled' and 'Log' are checked.
From the firewall computer, I can ping computers/servers on every newtwork. I can ping 'google'.
I see nothing in any of the logs (only traffic between the firewall computer and my workstation.)
I can not ping the external IP or any IP's outside the subnet (e.g., on 10.10.10.40, I can ping 10.10.10.15 but not 192.168.0.106).
I have read (and tried everything I can find in this forum and by googling but have been unable to get it to work.
Anyone have any ideas?
TIA,
Carl
Author