Installation 2.4.1 Community Edition on Soft Raid 1

[Guest]

[Allenrain]

Good day dear forum

I'm new here and I hope here to install Endian community edition 2.4.1'm right because gestalltet somehow difficult.
Should it recognize the place of it the hard drives he says 2 x 0GB (disk size 0), but there are which available 2 x 3 TB (BIOS sata1 = 3000GB, sata2 = 3000GB).
Weis a Council ??

Thanks in advance.

[kieronrob]

Hi,

Endian uses a rather old 32-bit Linux 2.6 kernel so it probably can't support such large disks.

I would try with two smaller disks and see if it works before trying larger disks.

[mmiat]

3TB? exaggerated, you need only 10GB