EFW Support

Support => VPN Support => Topic started by: arkeos on Wednesday 21 December 2016, 03:40:46 am



Title: How to configure IPSEC VPN (NET-TO-NET) EFW 3.2.2
Post by: arkeos on Wednesday 21 December 2016, 03:40:46 am
Hi there,

I have 2 EFW (community edition), one in the  office (HO) and the other in the brand office (BO), and I want to create a VPN IPSEC Tunnel between them.

My architecture is as below :

HO :

Lan : 192.168.1.0/24
wan : 10.10.10.0/24
EFW ADDRESS : 192.168.1.20
STATIC PUBLIC IP : xx.xx.xx.xx

BO :

Lan : 192.168.5.0/24
wan : 11.11.11.0/24
EFW ADDRESS : 192.168.5.20
STATIC PUBLIC IP : xx.xx.xx.xx

Notice that both; HO EFW and BO EFW, are behind a D-link router (no NAT Configured).


Best Regards