|
Title: Set VLAN Post by: miki22 on Sunday 13 December 2020, 06:32:24 pm Good morning
On my endian I have two zones: A Green 192.168.1.0/24 One Blue 192.168.10.0/24 We must activated vlan We see in the INTERFACE menu we can set VLANS We click ADD to VLAN we set interface green + set id = 1 + set green zone When we set this parameters the green interface go ko we have reinstalla Endian 3.3.2 and we had try with blue zone: We click ADD to VLAN we set interface blue + set id = 2 + set blue zone When we set this parameters blue go ko anyone can help us? NB - In our firewall menu we have set the firewall inter-zone active from blue to green is that a problem? Title: Re: Set VLAN Post by: justme on Friday 19 February 2021, 08:38:30 pm this is normal, you need to have at least one vlan in place, once you enable it, the untagged traffic will be dropped
so in your case, if you enable vlan 1, all traffic needs to be tagged using vlan 1, the same for blue zone, but with tag 2 Title: Re: Set VLAN Post by: miki22 on Monday 08 March 2021, 08:11:13 am ok i try to review the problem, thanks a lot for the reply!
Title: Re: Set VLAN Post by: miki22 on Sunday 25 April 2021, 05:09:08 pm ok i tried and everything works thanks.
I write what we have done in favor of other users: Basically, we connected a switch after the firewall with a trunk port then we put the vlan on the switch and we connected the computers to the untagged vlan Everything works perfectly! Thanks |